The newly designed Dragonfly™ standard motorized projection screens will not only be one of the simplest pieces you install in a front projection system, but will also give you the same stellar visual performance as its fixed-screen counterpart. As standard screens do not offer a tab tensioning system, the fabric includes an inner layer of weaved fiberglass to stiffen the material to help hold a flat surface along the viewing area. Coupling this with a quiet tubular motor and discrete yet simple installation brackets only further its offerings. Because our goal is to make your job easier, we also include a full accessory kit for installation and operation right out of the box. The only thing we could have done to make your installations even simpler would have been to include RF capabilities. Oh, wait…we did.
High Contrast
Dragonfly projection screens with High Contrast screen material are best used in applications where the room lighting can not be completely controlled, or the projector being used has weak black levels. Black levels are important for contrast and if compromised, a loss of definition will occur. With a gain of .8, the screen will help absorb some extra light, thus helping to enrich the contrast.
Flexible Control Options
We’ve taken the guesswork out of specifying and controlling your Dragonfly motorized screen. Each model comes standard with the most popular control types: RS-232, IR and 12V trigger.
RS-232: The included RS-232 port is perfect for integrating the screen into popular control systems.
IR: The included case-mounted IR receiver means you can mount the screen and start controlling it right of the box with the included IR remote control. Should you choose to hide the casing completely behind a curtain, soffit or in the ceiling itself, an off-board IR receiver is included to let you simply plug in and place at a discrete location. Simple!
12V Trigger: If you're using a projector or AV receiver with a 12V output, use the included 30’ cable to easily have the screen raise and lower when that device is turned on. When the installation prohibits using a wired solution, you can go wire-free with our DFM-RF-TRIG-12V (for use with projectors that have a 12V trigger) or DFM-RF-TRIG-110V (for use with projectors that do not have a 12V trigger output).
Keypad: Use the included wall switch and cable for quick and easy connection. Alternatively you can also add an additional momentary contact switch to control the screen from two locations.
Super Simple Installation
Mounting brackets install in seconds, the screen assembles in just a minute. Locking it down is as simple as using a screw gun. Literally. Once you set your installation brackets in the location desired, simply lift the screen on and set them on the bracket hooks. Use a screw gun to turn the locking screws and the brackets clamp in a flash. Low profile and a simple design just lead to fast and great-looking installations.
Quick & Quiet Motor
If you weren't lowering the screen, you'd barely know what was going on. The new Dragonfly™ standard motorized projection screens, with its tubular motor, will give your customer quiet and reliable operation day in and day out. And with an average drop time of 13 seconds, lag time is minimized.
Specifications:
Screen Material / Gain: PVC/fiberglass weaved inner layer, .8 Gain
Frame Construction: Aluminum Alloy, white
Unit of Measure: Each
Weight: 31.9 lbs.
Comparable Products: Draper Silhouette/Series E, Da-Lite Contour Electrol, Vutec Lectric IRF
Motor: 110V/.96A
Home Theater (4)
Home Theater Packages (1)
Car Audio (216)
Surveillance Cameras (35)
